3M hot melt applicator accessories are designed to offer versatility when dispensing 3M hot melt adhesives. Uniquely designed for 3M hot melt applicators, these accessories maximize the use of hot melts by improving productivity, optimizing precision and reducing waste in your assembly process. A special assembly that optimizes productivity by holding 3M hot melt applicator PG II or 3M hot melt applicator PG II LT in a 45 deg position for hands free adhesive application. This step saving system allows one worker to concentrate on joining the material while minimizing fatigue from positioning the applicator before and after each step. Mount includes bracket, stand and nozzle assembly. 3M hot melt applicators, also referred to as "glue guns," are tools used to apply liquefied thermoplastic adhesives and are available in low and high temperature versions. Low temperature adhesive applicators operate at approximately 250 deg F/121 deg C and are beneficial when bonding heat sensitive materials such as electronics, plastics and cloth. High temperature applicators operate at a minimal temperature of approximately 380 deg F/193 deg C and can dispense adhesives that produce a stronger bond than low temperature adhesives. Melted 3M hot melt adhesive is extruded through the nozzle by either pneumatic pressure, a mechanical trigger mechanism or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation. In our 3M industrial adhesives and tapes division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.